CME 182 Engineering Design and Graphics CME 250 Statics CME 260 Mechanics of Materials CME 390 Composites Manufacturing CME 401 Engineering Economics CME 420 Manufacturing Systems Analysis CME 475 Design Project I CME 480 Design Project II
Office Hours D2L Brightspace Dept of Composite Materials Engineering
Professor Dennehy
Department of Composite Materials Engineering
Stark Hall 203F (507) 457-5276 kdennehy@winona.edu
CME 480 Design Project II
Description Information Objectives Calendar Requirements
Lab Safety and Proper Handling of HazMat Visual Inspection of Composite Parts Design Project Websites
Project Description Teams Manufacturing Plans Tools and Fixtures Qualification Test Plan Qualification Test Unit and Test Fixtures Final Design Project Website First Article Unit First Article Unit Presentation

Manufacturing Plans

plans need to be specific - it is expected that fabrication will be done in this manner initially

(1) list of equipment

(2) list of tooling/fixturing

(3) list of materials and/or parts along with quantities

(a) raw materials (are converted during processing and become part of final product)
(b) process materials (used during processing, but do not become part of final product)
(c) purchased parts (incorporated as is into final product)

(4) processes (do not have to be described in a detailed step-by-step manner as in work instructions, but the equipment, tooling/fixturing, and materials listed above are to be referenced)